tag:blogger.com,1999:blog-50685481585254951512024-03-19T11:42:26.278+00:00Simons RobotsAnonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.comBlogger34125tag:blogger.com,1999:blog-5068548158525495151.post-67377247368509534182018-07-04T20:55:00.002+01:002018-07-14T18:08:56.035+01:00K9 Photos: Mat Irvine's K9<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg4fTPCBj6We-ob434sNCcV4tTAgHTYGBUmxEFifSPM2u1hib0q1T5RlyeD2FKMJZSm5hGfq1BXPhiBBQDa6pAmFPAWsKCrq9aBhwwvwSG6HPBrXqI_ZirW0f7q5XU9DTkKRxi2WGiZ5PA/s1600/K9-control-panel.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="557" data-original-width="750" height="296" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg4fTPCBj6We-ob434sNCcV4tTAgHTYGBUmxEFifSPM2u1hib0q1T5RlyeD2FKMJZSm5hGfq1BXPhiBBQDa6pAmFPAWsKCrq9aBhwwvwSG6HPBrXqI_ZirW0f7q5XU9DTkKRxi2WGiZ5PA/s400/K9-control-panel.JPG" width="400" /></a></div>
<br />
The above photo is of the control panel of an original K9 owned by Mat Irvine photographed at Smallspace 7, 2018.Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com1tag:blogger.com,1999:blog-5068548158525495151.post-3988762091340474312018-07-02T20:32:00.000+01:002018-07-18T10:26:42.229+01:00K9 at Smallspace 7K9 became an interloper when we visited Smallspace 7 in Hanslope this weekend, the event was organised by Mat Irvine.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgU9mzHq2hBaTOdqNzsxuM3lAM9wuR_PwIOQ4x6zKZHdiX-I7VYntByYjNR0t9xg4nm6OgiBJ4YgLP4c997aBBo8cCKHDHtxpb4EAtBvz8CcNDSoUFiIptj-ILCchK0agzmlOQ4zLSCd9w/s1600/k9-matt-02.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="638" data-original-width="850" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgU9mzHq2hBaTOdqNzsxuM3lAM9wuR_PwIOQ4x6zKZHdiX-I7VYntByYjNR0t9xg4nm6OgiBJ4YgLP4c997aBBo8cCKHDHtxpb4EAtBvz8CcNDSoUFiIptj-ILCchK0agzmlOQ4zLSCd9w/s640/k9-matt-02.jpg" width="640" /></a></div>
<br />
I was very pleased when Mat said that my K9 was one of the better K9's he had seen, and I'm sure he has seen a few. Whilst we were there we drove around the village hall with occasional stops to view the merchandise and for photo ops for K9, lots of people were pleased to see him and asked to take photos and I got so many compliments. Mat even took a photo :)<br />
<br />
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiqmxn5lxDjyrGTziEoPpUCc6Cq7MfMMr_gu3psRL-YOxtHoJEQthcRA-nWVQv0uRDqvtD_DdXIlLfwlQP1mgZNn3Ad2_Zxb-L4TZmHEytNPHoPe8mtjmZQ8BgsKtgzhYnrNOU8Y23hTP8/s1600/k9-matt-01.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="638" data-original-width="850" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiqmxn5lxDjyrGTziEoPpUCc6Cq7MfMMr_gu3psRL-YOxtHoJEQthcRA-nWVQv0uRDqvtD_DdXIlLfwlQP1mgZNn3Ad2_Zxb-L4TZmHEytNPHoPe8mtjmZQ8BgsKtgzhYnrNOU8Y23hTP8/s640/k9-matt-01.jpg" width="640" /></a><br />
<span id="goog_782779453"><br />Although Mat did point out a few deficiencies in my K9 such as the sucker being a little on the small side, and the lack of bumpers, but he was also impressed with my LED panels and said he may borrow the idea in the future.</span><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg14FcxyP38vvPOmoKT-WVaMw77FzwsdEznHy7uVKh3uRVhOif_fFCVEqhm-_dFwwGRySmXVwV4zgBeTMYX5qZu-PRDMkkaUheyRArguibrtH4oIxA6HZ_8ShK_m_j27kp_C5Tubc1WBCQ/s1600/si-double-k9-02.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1108" data-original-width="850" height="640" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg14FcxyP38vvPOmoKT-WVaMw77FzwsdEznHy7uVKh3uRVhOif_fFCVEqhm-_dFwwGRySmXVwV4zgBeTMYX5qZu-PRDMkkaUheyRArguibrtH4oIxA6HZ_8ShK_m_j27kp_C5Tubc1WBCQ/s640/si-double-k9-02.jpg" width="490" /></a></div>
<span id="goog_782779453"><br />My interloper K9 did get to pose near the proper K9 (as did I), I also took the opportunity to take lots of detail photos of for future development.</span><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg_kTaocmO0WHkqkHRKX0v1iMgkeNrRMpq18TuHBCUlsfNzWSkY5T-f23XSGJQLwCKze9Knvntbf8UkmvOMaYaupKVrQXwp41jOd4JvRWdhJP29agXhST99Dsq7VaRKZ0V04HgmzohjSVE/s1600/k9-vila-01.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1133" data-original-width="850" height="640" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg_kTaocmO0WHkqkHRKX0v1iMgkeNrRMpq18TuHBCUlsfNzWSkY5T-f23XSGJQLwCKze9Knvntbf8UkmvOMaYaupKVrQXwp41jOd4JvRWdhJP29agXhST99Dsq7VaRKZ0V04HgmzohjSVE/s640/k9-vila-01.jpg" width="480" /> </a></div>
<br />
<div class="separator" style="clear: both; text-align: left;">
All in all it was a fun day out with lots of interesting merchandise, and my wife even managed to get a shot of K9 with Vila Restal (Blakes 7 - Michael Keating) in the background :) </div>
Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-38006319731476037022018-05-27T17:45:00.002+01:002018-07-14T18:03:05.004+01:002nd K9 ContinuedAfter a little work in the garage, I'm begining to see what I need to do to knock this body shell into shape. A little strengthening here and there etc and it should be good to go.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhIks4OAVGBzQWigzx1nLzJFKFHwA61vrvkYwR9pPNBOZxQbpKsVCZo32cgASr8JEl9n108iEe33s-CIRGaWQdmhgR8wsYCy4_Kaeo_Jt27aZs5RMJ9Q-_MdyhhDUgRpF44LQ3qhj92yig/s1600/20180527_173636-s.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="661" data-original-width="1000" height="420" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhIks4OAVGBzQWigzx1nLzJFKFHwA61vrvkYwR9pPNBOZxQbpKsVCZo32cgASr8JEl9n108iEe33s-CIRGaWQdmhgR8wsYCy4_Kaeo_Jt27aZs5RMJ9Q-_MdyhhDUgRpF44LQ3qhj92yig/s640/20180527_173636-s.jpg" width="640" /></a></div>
It looks much better with the excess fibreglass cut off.<br />
<br />
The second control panel, <br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEifdxpGEs-vl8-BtF4eEvSepbk68x0yBIEYgL2MnSbwsjF30QhO8OcszF1RAwODZKt_OIJVVh2vf58sQLGxp5tk1UMY2EdSW-Sw5NOZSBhSsEbj7KySG32D7Qkpy2evCQvj6Y_l3-Xrc1o/s1600/20180712_cp-in-mould.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="539" data-original-width="850" height="252" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEifdxpGEs-vl8-BtF4eEvSepbk68x0yBIEYgL2MnSbwsjF30QhO8OcszF1RAwODZKt_OIJVVh2vf58sQLGxp5tk1UMY2EdSW-Sw5NOZSBhSsEbj7KySG32D7Qkpy2evCQvj6Y_l3-Xrc1o/s400/20180712_cp-in-mould.jpg" width="400" /></a></div>
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjvluL3l_1ZcO4vOP5OEowKqBd-GhUUEL9I9_xB5HNfvOSI2r4EhTlAZOG2hYhIui1cL2Sgm_IgmA0w4LQTSuddCX5rS8vPRAINCXL8W1z9BYz6By0j4X7_eoR6V5vJyevtMbu4D6Amnho/s1600/20180712_cp-fresh-out.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="632" data-original-width="850" height="296" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjvluL3l_1ZcO4vOP5OEowKqBd-GhUUEL9I9_xB5HNfvOSI2r4EhTlAZOG2hYhIui1cL2Sgm_IgmA0w4LQTSuddCX5rS8vPRAINCXL8W1z9BYz6By0j4X7_eoR6V5vJyevtMbu4D6Amnho/s400/20180712_cp-fresh-out.jpg" width="400" /></a></div>
<br />Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-12257574800131600812018-05-07T22:53:00.003+01:002018-07-14T17:50:53.960+01:00Second HeadThe Idea is to cut a hole in K9's head to accomodate a speaker, but as I don't want to do major changes to K9 which I cannot easily reverse I thought it best to make a whole new head to work on.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhnDfqxLSeYrdKLVRmP2r3j1kfYb8uW49F8G_QGOsgotnRsLt3Xhyj4ZwXaVg-ekpTWkUmMflcgSwmoy9WzJbYfnMcfhs2Y0C3KqBYTJCMMaV4ul8DozYzslp9RpmfQeQcru9b1ahKe7q0/s1600/2nd+head+01.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="563" data-original-width="1000" height="225" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhnDfqxLSeYrdKLVRmP2r3j1kfYb8uW49F8G_QGOsgotnRsLt3Xhyj4ZwXaVg-ekpTWkUmMflcgSwmoy9WzJbYfnMcfhs2Y0C3KqBYTJCMMaV4ul8DozYzslp9RpmfQeQcru9b1ahKe7q0/s400/2nd+head+01.jpg" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">and so it begins</td></tr>
</tbody></table>
The Gel coat took an exceptionally long time to cure, so I've ordered some fresh catalyst, but in the mean time I removed the part from the mould.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhARHJpWGZ2h43equg5lxd-3lJMqBOlbq0IksgW1sSej1sVi_f7o7b8O1EiF2ivNE9XGuNszVei_WqydlyMO1Tw1-GTysowBcgFj1xYQvxqsjAlS1-nCJWOWLOkbi7uZVJLUk9TXUxsDt4/s1600/2nd+head+02.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="556" data-original-width="1000" height="221" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhARHJpWGZ2h43equg5lxd-3lJMqBOlbq0IksgW1sSej1sVi_f7o7b8O1EiF2ivNE9XGuNszVei_WqydlyMO1Tw1-GTysowBcgFj1xYQvxqsjAlS1-nCJWOWLOkbi7uZVJLUk9TXUxsDt4/s400/2nd+head+02.jpg" width="400" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
And did a little tiding up.</div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEigf-GikUlmcARup-e8g0OH5PxQtDbY06uJ_snB6XBVBl743KbZE6xPPmuOAtkxUHi91NXEhNz4OZvxJr3KUYCof4UHxYqon61G2mqnVnhOLNQg0TccfQ_pyOmO9pYYiHgXQXyO-HgIF4A/s1600/2nd+head+03.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="549" data-original-width="1000" height="218" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEigf-GikUlmcARup-e8g0OH5PxQtDbY06uJ_snB6XBVBl743KbZE6xPPmuOAtkxUHi91NXEhNz4OZvxJr3KUYCof4UHxYqon61G2mqnVnhOLNQg0TccfQ_pyOmO9pYYiHgXQXyO-HgIF4A/s400/2nd+head+03.jpg" width="400" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
Now I'll have to wait for the new catalyst to arrive so progress is halted.</div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh4zSi6TnhRsTplG2u4HOZHnPSDmpwuxRwimq562v3lcx4-wppRi9h1yjvBgnfjV1jeJ3aX3Hs_y6MskBm9RX4EZicZfOT034NdT0BVxdJAaUpUdk2sMAoiKxOcdv7MSm55PghQdIYAY48/s1600/13-may-2018-head-mould.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="651" data-original-width="1000" height="260" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh4zSi6TnhRsTplG2u4HOZHnPSDmpwuxRwimq562v3lcx4-wppRi9h1yjvBgnfjV1jeJ3aX3Hs_y6MskBm9RX4EZicZfOT034NdT0BVxdJAaUpUdk2sMAoiKxOcdv7MSm55PghQdIYAY48/s400/13-may-2018-head-mould.jpg" width="400" /> </a></div>
<div class="separator" style="clear: both; text-align: center;">
The head ready to come out of the mould.</div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEigPfIa2Ppzro8cQcIEwX7gBlheVxyv5KJeK_stJBtguDlMnXj8pcSXO_9_uoMqBzdzqy0SQHx7jycCEdK2TpXD_8bsEoaTLhwvofrVc31fofCOQGSgto82lh_4xaQEq8ZLvWjf8Rtej9o/s1600/20-may-2018.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="720" data-original-width="1000" height="287" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEigPfIa2Ppzro8cQcIEwX7gBlheVxyv5KJeK_stJBtguDlMnXj8pcSXO_9_uoMqBzdzqy0SQHx7jycCEdK2TpXD_8bsEoaTLhwvofrVc31fofCOQGSgto82lh_4xaQEq8ZLvWjf8Rtej9o/s400/20-may-2018.jpg" width="400" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="MsoNormal">
Next the control panel and side panel. The side panel may
take a little longer as I don’t have a mould for the side panel. The panel I have
on K9-1 is plywood that is impregnated with resin and spray, but I can perhaps
use it as a pattern.</div>
Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-87347628268530587062018-04-05T21:14:00.000+01:002018-04-15T16:19:15.166+01:00K9 - head upgrades<div class="separator" style="clear: both; text-align: center;">
</div>
Now progress on the control panel is coming to fruition, I need to look at wiring the I2C bus into the head. However when I came to look at the wiring, I've realised that a bit of rework is in order.<br />
<br />
The visor Arduino Mega is mounted nicely, but the Arduinos for the radar ears and laser is very poor so needs sorting out before I add the extra wiring.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgIc6ILd-cCThu8m1793r6bfQuuk6TpJw9iYB_M9FTiOYTgCeoXy2JtmqmIcxqNYmTyXZ6OEX1sv4yGLNeN5j86v4jrWC6Rqf5_tuLJdbgvVAzUMpvLloKjX3jHkulXEFFqQLJuNMVHp78/s1600/wrinng02.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="1000" data-original-width="750" height="640" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgIc6ILd-cCThu8m1793r6bfQuuk6TpJw9iYB_M9FTiOYTgCeoXy2JtmqmIcxqNYmTyXZ6OEX1sv4yGLNeN5j86v4jrWC6Rqf5_tuLJdbgvVAzUMpvLloKjX3jHkulXEFFqQLJuNMVHp78/s640/wrinng02.JPG" width="480" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Spaghetti junction<br />
<br />
<div style="text-align: left;">
<span style="font-size: small;">After much work I've created an assembly for the 2 Arduino Nanos that control the ears and the laser, as well as a DC-DC converter an a signals distribution board. It is alittle tighter than I anticipated, but it is a removable module. </span></div>
<span style="font-size: small;"><br /></span>
<div style="text-align: left;">
<span style="font-size: small;">Also it incorporates the I2C bus, so eventually they will take commands from the Raspberry pi, and not ust the control panel switches</span></div>
</td></tr>
</tbody></table>
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgludqmTMi6pEaysKXvlxuaiQD_YloCJCIdiXfxjkAe68KRqaBbpIr5Kttc0NjX8m17vEjVPCVfpooy51IqBcOP_9mr0BmnuJuslYBgYBRZ9gpu2zh6zI9MOySwbUCcmftU5u0wL-DVoWs/s1600/head-15-Apr-18a.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="1000" data-original-width="750" height="640" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgludqmTMi6pEaysKXvlxuaiQD_YloCJCIdiXfxjkAe68KRqaBbpIr5Kttc0NjX8m17vEjVPCVfpooy51IqBcOP_9mr0BmnuJuslYBgYBRZ9gpu2zh6zI9MOySwbUCcmftU5u0wL-DVoWs/s640/head-15-Apr-18a.JPG" width="480" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Progress</td></tr>
</tbody></table>
<br />Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-82129404924859418412018-04-01T21:07:00.002+01:002018-04-05T21:09:13.967+01:00K9 - Control PanelThis weekend I'm changing the button signals to I2C signals. I was disapointed to find that the Raspberry pi could only be a master so will not respond to I2C signal. It will only request data from slaves.<br />
<br />
Pre - conversion pic<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhEL5dxzr4QV-kAn-wPe46hrCTU_1MOFuJpwRyu9KRZ57wHAPlaZns2FCBvfwGmaDoDSlsEXuNZr3ybuCDip7AGkErbpFvkY7z61Ajofg1urIE16k_np7oKlLELzlGMeqJ9vGxJT59ZsCY/s1600/CP-01.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="750" data-original-width="1000" height="240" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhEL5dxzr4QV-kAn-wPe46hrCTU_1MOFuJpwRyu9KRZ57wHAPlaZns2FCBvfwGmaDoDSlsEXuNZr3ybuCDip7AGkErbpFvkY7z61Ajofg1urIE16k_np7oKlLELzlGMeqJ9vGxJT59ZsCY/s320/CP-01.JPG" width="320" /></a></div>
Progress is slow but getting there. <br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgR1ytBT8Xmj-E7sIPBr18TdIKzF9Bn70tslxLoAxKsX9rPcEr3MH6-SNdk-wBOQgkxKlbUFsnv1MeNEIXC0xf7nSlXVaj8iakLd3Q8ixv2asMYtdofxA_q4xPOmapsWCtDqribYuVKMHc/s1600/CP2.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="1333" data-original-width="1001" height="400" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgR1ytBT8Xmj-E7sIPBr18TdIKzF9Bn70tslxLoAxKsX9rPcEr3MH6-SNdk-wBOQgkxKlbUFsnv1MeNEIXC0xf7nSlXVaj8iakLd3Q8ixv2asMYtdofxA_q4xPOmapsWCtDqribYuVKMHc/s400/CP2.JPG" width="300" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Nano support and some wiring</td></tr>
</tbody></table>
Arduino Nano One to control the LED's in the switches. Arduino Nano 2 to detect button pushes and send via the I2C bus. Arduino Nano 3 & 4 to control the LED matrix in 2 red displays. Only One LED matrix fitted and half wired.<br />
Power and signals to the control panel through the 9 pin D-type connector.<br />
<br />
<br />
<br />Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-68378572398411938002018-01-29T17:32:00.003+00:002018-07-14T17:54:11.850+01:00Red Wedge DownWhilst reviewing Red Wedge with a view to letting the Young Roboteers a go driving a small combat robot, I realised that one of the wheels was seized. After stripping the gearbox, I found that many of the gears had broken teeth which were jamming the gearbox.<br />
<br />
So I need a replacement if Red wedge is to fight again. This is an old motor from an cheep drill I think it was B&Q we got them from. This was before the moder LiPo batter drills.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgHRgUylQoI11atszAQMtT1dQuzRqsydC-ZPssTsOd_IkagviJiEqQs7sKluiEt6feGbm4Hsd0eyt8hRWEUIgvHShRmrue58xoLOmNFqao-vMsT4ez15aAJl0Z7pHfUXlvBLuBvrPpI_7o/s1600/20180128_190307s.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="917" data-original-width="1200" height="244" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgHRgUylQoI11atszAQMtT1dQuzRqsydC-ZPssTsOd_IkagviJiEqQs7sKluiEt6feGbm4Hsd0eyt8hRWEUIgvHShRmrue58xoLOmNFqao-vMsT4ez15aAJl0Z7pHfUXlvBLuBvrPpI_7o/s320/20180128_190307s.jpg" width="320" /></a></div>
<br />Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-75574091828038459552018-01-01T01:02:00.001+00:002018-01-01T14:37:27.146+00:00K9 - Is there anybody home?<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhXcz7qiULKU-_aS_9_Aln1OKYuFtXlFUyISURznkB0DjLx4Sems1BXpnZcytWd23zC3dcDNCFKB0TNhlkbL1IQsECOe8U4h9Pkhn5QEevgN5rgDO-qWJZcqlBGJ7Lw2bRER8iFCC8FuzU/s1600/ros1.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="563" data-original-width="1000" height="360" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhXcz7qiULKU-_aS_9_Aln1OKYuFtXlFUyISURznkB0DjLx4Sems1BXpnZcytWd23zC3dcDNCFKB0TNhlkbL1IQsECOe8U4h9Pkhn5QEevgN5rgDO-qWJZcqlBGJ7Lw2bRER8iFCC8FuzU/s640/ros1.jpg" width="640" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">ROS on my pi</td></tr>
</tbody></table>
It was fun to build a K9, but there is something missing to my canine companion. That is intelligence!<br />
<br />
With this in mind I'm investigating the Robot Operating System or ROS for short.<br />
<br />
It
has been painful getting it onto the Raspberry pi, as the instructions
are not quite as complete as you would like and my knowledge of the
raspberry pi is a little sketchy. Consequently it has taken about a week
of the Christmas break to get it installed.<br />
<br />
However, it is now on the pi (and backed up) and I've started on the actual ROS tutorials :)<br />
<br />
So far I've got as far as driving around a simulated turtle, as aboveAnonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-90252802937890043942017-11-02T19:05:00.000+00:002018-07-14T18:02:37.617+01:00K9 Diaries - 2017 Mini Maker Faire DerbyK9 had another outing, this time at the Derby Mini Maker Faire, at the Silk Mill Museum on the 28th of October 2017 and look who he snapped on his K9 cam.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg6Uf5egUWZrQo8FycEcBz9908ijfHdk588-V0w3h_yn4sS8J4bz41A3khZGEJ9F0bzFC1WnOVNic1I-tVSrUOpQUHNsi7VisjAGnKfg4iN1DNUsZRVTQedk3fPXPrMDiGMBPxIwoBtyDg/s1600/image0810.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="600" data-original-width="800" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg6Uf5egUWZrQo8FycEcBz9908ijfHdk588-V0w3h_yn4sS8J4bz41A3khZGEJ9F0bzFC1WnOVNic1I-tVSrUOpQUHNsi7VisjAGnKfg4iN1DNUsZRVTQedk3fPXPrMDiGMBPxIwoBtyDg/s400/image0810.jpg" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Dr Lucy Rogers</td></tr>
</tbody></table>
<br />
Improvements since Whooverville are the tail mechanism and the visor lights, although there were some malfunctions with the visor lights, as some of them wer not working, but this turned out to be just some poor connections.<br />
<br />
I usesd an Arduino Mega 2560 for the visor control, mostly because of the large number of I/O's available, and there is a connection to one of the switches on the control panel to change from all on mode to a Knight Rider function.<br />
<br />
Below is the mounting of the Arduino Mega 2560, mounted on a plate, which slides into features which are bonded to the inside of the head, then a retaining clip holds it in. I just need to figure out the cable routing. <br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhFhn7PMq5qPWrAyggEG9hZh9RlJIVT8F9IkanzZa2Z5mmtECRmWbwJejxcKkYq0flr22otV374fDYARjf1zBUd3mUS15wA1D9bb-pzCf6NFytVRIUBycWQCd6ruYqbdwx-cEhyphenhyphenPIlI3ng/s1600/20171111_222756s.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="563" data-original-width="1000" height="360" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhFhn7PMq5qPWrAyggEG9hZh9RlJIVT8F9IkanzZa2Z5mmtECRmWbwJejxcKkYq0flr22otV374fDYARjf1zBUd3mUS15wA1D9bb-pzCf6NFytVRIUBycWQCd6ruYqbdwx-cEhyphenhyphenPIlI3ng/s640/20171111_222756s.jpg" width="640" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Arduino Mega 2560 mounted</td></tr>
</tbody></table>
<br />
I've since fixed and added a random function<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<iframe allowfullscreen='allowfullscreen' webkitallowfullscreen='webkitallowfullscreen' mozallowfullscreen='mozallowfullscreen' width='320' height='266' src='https://www.blogger.com/video.g?token=AD6v5dx52gbEhsF-T2iprLdI_liaP5aGQ-w7U4OlrDITgCfhN9Uauz6BSe3oEW2gLk4HWk3yT5H-DWI2kS6OG3Bgig' class='b-hbp-video b-uploaded' frameborder='0'></iframe></div>
<br />
<br />
The tail now also wags at the push of a button on the control panel. This is controlled by an Arduino Nano, with a simple sequence to a servo.<br />
<br />
We ordered a Tom Baker cut-out to pose next to K9, who was well received with many people having their photos taken with K9 & Tom and lots of children had fun pushing the buttons.<br />
<br />
I'm still working on improvements such as fitting the laser extender
mechanism and the Software for the visor lights, which needs changing to
an inturrept rather than waiting for the loop to finish before
recognising the input.Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-36214334958240345962017-10-02T22:08:00.003+01:002017-10-02T22:08:53.327+01:00K9 Diaries - Development<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjglV73wK-DmX4deJPPYp2lR1XlyYxcR7YA8jWKw76Eg_pe4toFEzC4CBCW0z3I5UQtxqYhWjgOZXHsaIcbS_u2dyUf6V6CyiaekM29vpEIyAvtorNjbMX6LnT2JX4iUJnJLxoqgDveUXk/s1600/ads1115.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="920" data-original-width="1000" height="367" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjglV73wK-DmX4deJPPYp2lR1XlyYxcR7YA8jWKw76Eg_pe4toFEzC4CBCW0z3I5UQtxqYhWjgOZXHsaIcbS_u2dyUf6V6CyiaekM29vpEIyAvtorNjbMX6LnT2JX4iUJnJLxoqgDveUXk/s400/ads1115.JPG" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">ADC and level shifter</td></tr>
</tbody></table>
The first job is battery monitoring, as I don't know how long to expect the batteries to last then it is important to have some feedback from them to determine their charge level. The Batteries at 12.4V each and the minimum discharge level is 9V.<br />
A simple voltage dividing pair of resistors and a connection to the Raspberry Pi via the I2C bus has been made. The Adafruit library and example program has been added to the Pi and tested, so I just have to wire the inputs to the batteries and adjust the program to monitior the voltage and calibrate the output to reflect the true voltage.Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-75933676373749220462017-09-07T23:26:00.001+01:002018-07-14T17:55:56.855+01:00K9 Diaries - Motor Controller Issues.<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiItxIojEeFwXb-eltArVQZS9ToT5498EnWxIwAwUBy_JTcDjNyCLsnh-3dCGi23WiZOq1mDz9M_ncy5E39iAtAf4ZOJqesK2-UUWqV0_zHRqqXRcFaO7DURxWEhSGtHmCqoKqilvl9duU/s1600/inside.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiItxIojEeFwXb-eltArVQZS9ToT5498EnWxIwAwUBy_JTcDjNyCLsnh-3dCGi23WiZOq1mDz9M_ncy5E39iAtAf4ZOJqesK2-UUWqV0_zHRqqXRcFaO7DURxWEhSGtHmCqoKqilvl9duU/s400/inside.JPG" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">K9 wiring</td></tr>
</tbody></table>
The inside on K9 are pretty straight forward. There is a Sabertooth motor controller. Its a 2x32 generation 3 controller, which means it has a USB interface to an application called DEscribe. With this you can monitor the inputs and outputs, which is handy. You can also specify the battery chemistry and many other bits and pieces.<br />
<br />
I've just fixed the motor controller location between the drive wheels, so it is no longer on top of the batteries.<br />
<br />
The other upgrade is fitting the Arduino Nano to control the tail servo. Again a little more thought when I was designing the wag mechanism, so there was somewhere to mount it, but ti-wraps to the rescue, and a mount from the walker robot and it is secure. The next iteration will have a dedicate mount point. The point is the tail which now wags!<br />
<br />
I decided to fit the 4 switch elements in the control panel, and wire them, and the I2C pins of the control panel Nano to the D-type connector which I've used as an interconnect. The I2C pins are fur future use / development. One of the switches can now be used to activate the wagging.<br />
<br />
The switches are a low level implementation but a first step in getting things going. Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-4558190383802495712017-09-03T21:01:00.001+01:002018-07-14T17:57:41.339+01:00K9 Diaries - Whooverville 9 2017<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgVe9RFUHPc2FNdnmrY2SZZNhJrbMMBTZho8ZJ6eRocZfJsjE6sjo4ewguiEJGNTdWyv7Z07Ee7anz_6snhDB1ZvlBv7y_0OaeFeExqUjYxX_l4g_vJoBWWZFUsNt5atdA8AZscBZCp7X8/s1600/20170902_161811.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="787" data-original-width="1000" height="502" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgVe9RFUHPc2FNdnmrY2SZZNhJrbMMBTZho8ZJ6eRocZfJsjE6sjo4ewguiEJGNTdWyv7Z07Ee7anz_6snhDB1ZvlBv7y_0OaeFeExqUjYxX_l4g_vJoBWWZFUsNt5atdA8AZscBZCp7X8/s640/20170902_161811.jpg" width="640" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi6rrd-IMmpl_4DsJKANRU1Ubn5k6UDrD31BAPYowlxgKm9Mgahp-G2eIPVFCuTKwHk9zH7xGlDdmsVMi8wsJKWRA98OyGSWXQwSHo4442_vQ1J7NGrEwlUA7gcHv4K6mKsGhkjXdfu-aY/s1600/20170902_162343.jpg" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" data-original-height="1000" data-original-width="563" height="640" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi6rrd-IMmpl_4DsJKANRU1Ubn5k6UDrD31BAPYowlxgKm9Mgahp-G2eIPVFCuTKwHk9zH7xGlDdmsVMi8wsJKWRA98OyGSWXQwSHo4442_vQ1J7NGrEwlUA7gcHv4K6mKsGhkjXdfu-aY/s640/20170902_162343.jpg" width="360" /></a></div>
Success, K9 was completed for Whooverville 9 at Derby Quad, his first ever outing, all the hard work was well worth it seeing the smiles on the faces of people that met him. I lost count of the number of people that complimented me on the build and a few even asked to buy him, more than my life is worth to sell him though, Debs finally has a dog and she's not parting with him lol!<br />
<br />
I had to have a go in the TARDIS :) K9's control panel looped through a sequence of K9 and then 200 random selections of the lights. <br />
<br />
The screen was fully operational, although we didn't want to infringe any copyrights by playing Dr who episodes at a public event, but as well as photo capabilities, K9 has movie playing abilities on his screen via his built Raspberry Pi.<br />
<br />
His antenna ears operated continuously for the whole event, as did his control panel, and we had his camera taking photos every 10 seconds to record what he could see during the day. <br />
<br />
Although we did have to cut out a fair number of shots of peoples trousers. Next time we'll have a perimeter around so we get see more people and less of their bags and behinds, we'll also encourage the people to smile for K9's Timey Wimey Cam as Debs has christened it. Below is a video Debs made from the images that K9 took.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<iframe allowfullscreen="" class="YOUTUBE-iframe-video" data-thumbnail-src="https://i.ytimg.com/vi/_GCH6Hlb_1g/0.jpg" frameborder="0" height="315" src="https://www.youtube.com/embed/_GCH6Hlb_1g?feature=player_embedded" width="560"></iframe></div>
<br />
Sadly his drive broke down, some issue with the motor control / receiver which needs to be investigated but all in all it was a brilliant experience,really good to see the smiles on the faces of people young and old who wanted to meet K9 and have their photo taken with him. We're already looking forward to Whooverville 10, see you there!<br />
<br />
<span style="background-color: white; color: #1d2129; display: inline; float: none; font-family: "helvetica" , "arial" , sans-serif; font-size: 14px; font-style: normal; font-weight: normal; letter-spacing: normal; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px;"></span>Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-1926794213397054482017-08-28T23:19:00.002+01:002017-09-04T17:32:31.489+01:00K9 Diaries - 4 days to go<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjwbaUkEomVc23vgU1GLN10RzFN9prCSMY2ai5b7rkYtP5iex6XjsvApEGX2L89PQdfIKDeBM1Ind0btNrPnFk2j9kdt7GVPCNNn54KPrmPTTdH1dLXj7NJA7IuF-FskMR7JxlRsc8NMNo/s1600/dog-tag.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="731" data-original-width="786" height="371" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjwbaUkEomVc23vgU1GLN10RzFN9prCSMY2ai5b7rkYtP5iex6XjsvApEGX2L89PQdfIKDeBM1Ind0btNrPnFk2j9kdt7GVPCNNn54KPrmPTTdH1dLXj7NJA7IuF-FskMR7JxlRsc8NMNo/s400/dog-tag.JPG" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Dog tag</td></tr>
</tbody></table>
Its come down to the last 4 days now, and I've persuaded Debs to make me a collar, and I 3D printed a dog tag.
<br />
<br />
The construction was easy enough, she covered a strip of leather with some
tartan fabric and added some Velcro to the edges to fasten it. <br />
<br />
The D
ring that the tag hangs from was taken off a collar that once belonged to her dog Mitzie, who died 17 years ago now, Debs kept her collar and thought it fitting to use a part of her beloved dogs collar on my beloved doggie project.<br />
<br />
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEit0aa05EvtAm-wdziKXMl6tBCMCs7X4bIa0VgxPeRPaSY-mx_Had417Hv8SjQov5ERQXguOroa4IsNxeGISmFjnOpkd_EWZ7awxeRPtqEmsU2btLXjQM7cwsM9x-nCU88SpUOzU2FouME/s1600/28aug17.JPG" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" data-original-height="936" data-original-width="1000" height="298" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEit0aa05EvtAm-wdziKXMl6tBCMCs7X4bIa0VgxPeRPaSY-mx_Had417Hv8SjQov5ERQXguOroa4IsNxeGISmFjnOpkd_EWZ7awxeRPtqEmsU2btLXjQM7cwsM9x-nCU88SpUOzU2FouME/s320/28aug17.JPG" width="320" /></a><br />
The 3D printing in the tag didn't stand out as much as I would have liked, so Debs applied a couple of layers
of 'Empire Gold' Pebeo Gilding Wax to the raised areas, she likes it when she gets to use her hobby on our robotic projects. <br />
<br />
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhhBzuafSkl9cux-2GHnL37ppmBCnUb5jGUQ_u4t9iu8XGyYdDHto6KYnjG8fWjhPnvtjIcP6xK462DidSu2zKWEf77AHd7EqFf0WFIIEtM8HhDjS_rPYt3rMpdwsNyJCmPUH9D-7z30Go/s1600/20170829_205902s.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="631" data-original-width="1000" height="251" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhhBzuafSkl9cux-2GHnL37ppmBCnUb5jGUQ_u4t9iu8XGyYdDHto6KYnjG8fWjhPnvtjIcP6xK462DidSu2zKWEf77AHd7EqFf0WFIIEtM8HhDjS_rPYt3rMpdwsNyJCmPUH9D-7z30Go/s400/20170829_205902s.jpg" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">head, primer and more filling</td></tr>
</tbody></table>
Unfortunately with just 4 days to go to the event, K9's head isn't ready yet and I've not figured out how to attach it to the body and its becoming obvious that more filling is required.<br />
<br />
After drilling the holes for K9's ears, and the visor cut-out, I primered the top of the head.<br />
<br />
Debs seems to be getting worried, and keeps asking me if it will be ready in time! Whats that all about?<br />
<br />
After a bit of sanding it'll be on to the top coat.<br />
<br />
So I nearly have a head, but it is time to be thinking of having a couple of days off work to give K9 a better chance of being ready :)<br />
<br />
<br />
<br />
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="clear: right; float: right; margin-bottom: 1em; text-align: right;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhIc5SytHWXRpR5k3ptCR91si93NFCGQxGKx_KeS82_aCzgipnYCYeXXXjbvCQrwj5oxH4_ijfycJd6M0dRrWiYmYs3cG4NdpZnM4CqUo0FLRGYmzaXD3Z8TUC8spHTyaUHTxlRqUSK1rc/s1600/20170829_205855s.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="753" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhIc5SytHWXRpR5k3ptCR91si93NFCGQxGKx_KeS82_aCzgipnYCYeXXXjbvCQrwj5oxH4_ijfycJd6M0dRrWiYmYs3cG4NdpZnM4CqUo0FLRGYmzaXD3Z8TUC8spHTyaUHTxlRqUSK1rc/s400/20170829_205855s.jpg" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">top primer</td></tr>
</tbody></table>
<br />
<br />
Now the control panel is painted, I can move on to assembling the components. The bezels
I've printed fitted into the 2 large holes and the 12 indicator lamps took no time at all to fit.
If there is time, I'll fit 4 momentary switch contacts to the top 4 switches, and use these as
manual operators of the ears etc<br />
<br />
Wiring the control panel is time consuming, and the software for the Arduino isn't started, let alone complete. <br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEimlbfT4_Mo0r7KjNDz4aiuG2PeBUS-nXxs-9bYNQ1kXARdYVujq_dNkr9TciOKCMxg1wUCl30vSGxu52jC2ZDXNVs_KkTAMMZ-caCqk6HW7CDml-BZDtOSMIdDD1WYHk7x0AntsSncXTk/s1600/wiring-cp.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" data-original-height="563" data-original-width="1000" height="225" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEimlbfT4_Mo0r7KjNDz4aiuG2PeBUS-nXxs-9bYNQ1kXARdYVujq_dNkr9TciOKCMxg1wUCl30vSGxu52jC2ZDXNVs_KkTAMMZ-caCqk6HW7CDml-BZDtOSMIdDD1WYHk7x0AntsSncXTk/s400/wiring-cp.jpg" width="400" /></a></div>
Fortunately it's not a difficult job as there are plenty of resources out there for Arduino, and the experience with programming the Chompalots eyes and walker robots servo sequencing has put me in good stead.<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
</div>
Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-41854683134108124112017-08-26T23:33:00.002+01:002017-08-27T22:20:14.702+01:00K9 diaries - 7 days<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg9SxiDbEwkt8nfs-dvRVQTzXcj5ONaJCyhBLYNOFUQUT_fIL04nIkixhyLabFKd-pwV3vEmSHGh5hyphenhyphenIun2yqhG3MbXXFSOKLo3JpWg4ZtHueNN4RyZL1ys-pAd-aY5ZVsg1qPRrVoFKMg/s1600/top-bares.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="563" data-original-width="1000" height="225" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg9SxiDbEwkt8nfs-dvRVQTzXcj5ONaJCyhBLYNOFUQUT_fIL04nIkixhyLabFKd-pwV3vEmSHGh5hyphenhyphenIun2yqhG3MbXXFSOKLo3JpWg4ZtHueNN4RyZL1ys-pAd-aY5ZVsg1qPRrVoFKMg/s400/top-bares.jpg" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Top of the head</td></tr>
</tbody></table>
7 days to go, and I've still not finished anything! I've still got a pile of unfinished dislocated bits. The head has at last been made and tidied up. I was scouting round trying to find something to use as a mould for the nose, but nothing was forthcoming so I modelled one on the CAD system and printed it on the 3D printer, then just stuck on with a bit of double sided tape to the head pattern before making the mould.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhpohXSzf4nKfQkIGxVXh53yJjD6PLlJyXx814Ou26eYQLsPIpcOdLxaksYIO8KnhVRqLyPUr2V4o9KIHsP1YLhq9fo-gGotl7U61nC100KViAenxBOcBwcsGk8HQusHc7mbfk20Kms_YE/s1600/cp-mould.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="654" data-original-width="1000" height="261" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhpohXSzf4nKfQkIGxVXh53yJjD6PLlJyXx814Ou26eYQLsPIpcOdLxaksYIO8KnhVRqLyPUr2V4o9KIHsP1YLhq9fo-gGotl7U61nC100KViAenxBOcBwcsGk8HQusHc7mbfk20Kms_YE/s400/cp-mould.jpg" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">control panel mould</td></tr>
</tbody></table>
<br />
The control panel mould is a bit rough and ready but seems to have come out all right. I used copious amounts of wax mould release.<br />
<br />
Below is the control panel and top of the head being produced in their moulds<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjzw4i-fjaO89GIPmpMccZ8aQrYmP3n_OhHdxiewPK40n_xXHDtBZYYvlLtV3Gh2QDrgsdDfHHun85054bW77Zf58BS4P8zTIr6rIz-hl9SEz5d-lmOJIqxNlphyV9Qay8TSQXy4teB2bY/s1600/cp-top-s.jpg" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" data-original-height="713" data-original-width="1000" height="285" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjzw4i-fjaO89GIPmpMccZ8aQrYmP3n_OhHdxiewPK40n_xXHDtBZYYvlLtV3Gh2QDrgsdDfHHun85054bW77Zf58BS4P8zTIr6rIz-hl9SEz5d-lmOJIqxNlphyV9Qay8TSQXy4teB2bY/s400/cp-top-s.jpg" width="400" /></a></div>
<br />
<br />
The control panel is out of its mould, and the Easylease release agent performed reasonably well,<br />
<br />
Another package arrived today, hopefully the panel switch/lamps. The battery charger arrived yesterday, so it is all coming together maybe.<br />
<br />
<br />
<br />
<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh4ZEIRXX7inDE42BmRCoOgSY-53ADUjda0mY9mbQDk3yth4CLpsAYkAapzOawduRFY8ucTW2gk7NPQRdLs1fLhPfgSKxSMQKKj8yUgc0cRLU2rGeTUOe22HzW_sz-hxHWy9G87DAbYhmk/s1600/cp-1.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="737" data-original-width="1000" height="293" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh4ZEIRXX7inDE42BmRCoOgSY-53ADUjda0mY9mbQDk3yth4CLpsAYkAapzOawduRFY8ucTW2gk7NPQRdLs1fLhPfgSKxSMQKKj8yUgc0cRLU2rGeTUOe22HzW_sz-hxHWy9G87DAbYhmk/s400/cp-1.jpg" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Control panel, pre-tidy</td></tr>
</tbody></table>
I couldn't resist perching it on top of the body shell after I'd tidied it up a bit (below).<br />
<br />
Now the control panel has appeared, the hole in the body shell can be made to suit it. Then the accommodation bits to stop it falling straight through need to be added. Then it is on to the body being primed and painted, after a bit of sanding. This would be a massive step, when K9 starts to come into view.<br />
<br />
<br />
<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: right; margin-left: 1em; text-align: right;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgJnmjssz4YZRGRtAFnydN60iWlxe9qanggWrDt_bXJloTUlm11IjXYmJQLQSB994q28O5Gg_SpiW9aRNjhG5JY_OqGAMNrYwCvtYJMapZLy33adkNbcT11gBk00y_xJHhuSmELP8RRlws/s1600/cp-2.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="605" data-original-width="1000" height="241" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgJnmjssz4YZRGRtAFnydN60iWlxe9qanggWrDt_bXJloTUlm11IjXYmJQLQSB994q28O5Gg_SpiW9aRNjhG5JY_OqGAMNrYwCvtYJMapZLy33adkNbcT11gBk00y_xJHhuSmELP8RRlws/s400/cp-2.jpg" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">trial perch</td></tr>
</tbody></table>
<br />
Once the body is painted all the systems can be fitted and integrated. The sub assemblies collected together and we will see what problems and missing bits we still have to sort out.<br />
<br />
The side panel is going to be a major part which needs making. There is no primer remaining and I think I need some more MDF!<br />
<br />
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiy_ct1vXeh-O7KNl8XNubID8QZNUBBe0uOJLCbyVuSSPKee7hPQl7aRuSD5ELnfoGnSRoJzt3NyBUl-juX3qr2JmnT2sjivo-iwjjfL8ELQgDZkPu4zDX6Vt4hqJiS4dNbEMnnNJl5-ms/s1600/DSC02155s.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" data-original-height="603" data-original-width="753" height="320" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiy_ct1vXeh-O7KNl8XNubID8QZNUBBe0uOJLCbyVuSSPKee7hPQl7aRuSD5ELnfoGnSRoJzt3NyBUl-juX3qr2JmnT2sjivo-iwjjfL8ELQgDZkPu4zDX6Vt4hqJiS4dNbEMnnNJl5-ms/s400/DSC02155s.JPG" width="400" /></a><br />
My attempts at tagging K9, with primer at this stage<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhD8iTpmvaxrBehH2y4aniJlFLJ-g5f90sYuB7qeK5YVRUoWNM-voGhOLDleQE-6Y9t4G39wzacVqkSAtyQy6ubqoNkYj1z8zRhZ3Ux2anZgNga3tn1b4sba-FUl-Lbz8lb7gWFb_NEcQo/s1600/DSC02170s.JPG" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhD8iTpmvaxrBehH2y4aniJlFLJ-g5f90sYuB7qeK5YVRUoWNM-voGhOLDleQE-6Y9t4G39wzacVqkSAtyQy6ubqoNkYj1z8zRhZ3Ux2anZgNga3tn1b4sba-FUl-Lbz8lb7gWFb_NEcQo/s400/DSC02170s.JPG" width="400" /> </a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiCwHq9IZF3-j2xIOoK-cuj9BFjeN9l50cThNUx_IgZ0-RWGnfs4Y85wZ2e1mEpme2KnX4IO1B41tNVIoGujeeHTLQwpLmnp-mXwjtepj6f59SpLRngalrheuTkvS1hPgzDXxlqW4-8Rk0/s1600/DSC02171s.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiCwHq9IZF3-j2xIOoK-cuj9BFjeN9l50cThNUx_IgZ0-RWGnfs4Y85wZ2e1mEpme2KnX4IO1B41tNVIoGujeeHTLQwpLmnp-mXwjtepj6f59SpLRngalrheuTkvS1hPgzDXxlqW4-8Rk0/s400/DSC02171s.JPG" width="400" /> </a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh65v5-QwZE7IqTzRzU4-YGdj5bRj3pVUAQRysmFrpWLiRU-koXsNQ_SXmqzYKv0VQ9JreaaVdEMqgfkTHWtolPbF3DEUcbhHXkE62wcbqVK5gn0J9bPK8MAi3VOGNzIJHm1kt-vSNILIs/s1600/DSC02169s.JPG" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh65v5-QwZE7IqTzRzU4-YGdj5bRj3pVUAQRysmFrpWLiRU-koXsNQ_SXmqzYKv0VQ9JreaaVdEMqgfkTHWtolPbF3DEUcbhHXkE62wcbqVK5gn0J9bPK8MAi3VOGNzIJHm1kt-vSNILIs/s400/DSC02169s.JPG" width="400" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjV6QshtcroD8nUQNZZAVP5Z2gb0yFnMM9oBr189ZodoNptNGwXFcrE8tWxl3mkQgMmahNQa_QFAAhJnqpRCyvGdRBn7Ax__P7kZ9YK7CJZnHZuGwYBzXYdkEtO-kIKmgAt5j6z09P4c-c/s1600/20170826_214117s.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" data-original-height="690" data-original-width="1000" height="275" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjV6QshtcroD8nUQNZZAVP5Z2gb0yFnMM9oBr189ZodoNptNGwXFcrE8tWxl3mkQgMmahNQa_QFAAhJnqpRCyvGdRBn7Ax__P7kZ9YK7CJZnHZuGwYBzXYdkEtO-kIKmgAt5j6z09P4c-c/s400/20170826_214117s.jpg" width="400" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-22451062855370068632017-08-22T23:16:00.002+01:002017-08-23T10:34:25.627+01:00K9 Diaries - 11 days to go<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEho9asJaZZkFnDnAXqxj45o6JyAEio5RVJUr6sfIGFAVpbUmD6kZ2AZR9BcjfkVqKI-ANDWA_0Qh6r2N3IBusXg1eHzoEvr-b9M864JIH5I_5UhyxQIts_EjcXJio688xEllr1X9JThUfs/s1600/DSC02146s.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEho9asJaZZkFnDnAXqxj45o6JyAEio5RVJUr6sfIGFAVpbUmD6kZ2AZR9BcjfkVqKI-ANDWA_0Qh6r2N3IBusXg1eHzoEvr-b9M864JIH5I_5UhyxQIts_EjcXJio688xEllr1X9JThUfs/s400/DSC02146s.JPG" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Head Mould</td></tr>
</tbody></table>
<div class="separator" style="clear: both; text-align: center;">
</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
Only 11 days remaining before the appearance of k9 the wonder dog, so I'd better get my skates on. Fortunately I've been working slowly but steadily towards the ultimate goal. Sometimes it seems like he'll never be done, and so many different things to organise, and co-ordinate, with things slowly lumbering into position, it's like the aligning of the planets.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgV2KEzEcRmhLxnhDYR_UjSGCBN8oli_VakgyDPDgm7b-I3ZsVXsQufXPP2z5lm-O075c5kxDmvxS3h75cALHi9PIAcg55NFKBHst-97-OPmdnZsA9B0HXc5aT2r3MVJXGz0X1mXx4yhfs/s1600/DSC02147s.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgV2KEzEcRmhLxnhDYR_UjSGCBN8oli_VakgyDPDgm7b-I3ZsVXsQufXPP2z5lm-O075c5kxDmvxS3h75cALHi9PIAcg55NFKBHst-97-OPmdnZsA9B0HXc5aT2r3MVJXGz0X1mXx4yhfs/s400/DSC02147s.JPG" width="400" /></a></div>
<br />
Fortunately the head mould did come apart mostly OK. Just a little sticking on the front of the head in the mouth area. Relatively cleanly, so only a little tidying up and it and it should be good to go.<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhu7UT8XHj2dUCqNOBRIU_vS4mxbclpXHidcjbGCt7CvOWsqWlkQ1jnypkfjOWqG639ClAK8edf41uPqGficwxH3t3Xs8pWY9k54CWHn6YZff5PBflfKirbR_GJHCIYcLD0ENfD-2RYNWc/s1600/DSC02145s.JPG" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhu7UT8XHj2dUCqNOBRIU_vS4mxbclpXHidcjbGCt7CvOWsqWlkQ1jnypkfjOWqG639ClAK8edf41uPqGficwxH3t3Xs8pWY9k54CWHn6YZff5PBflfKirbR_GJHCIYcLD0ENfD-2RYNWc/s400/DSC02145s.JPG" width="400" /></a></div>
<br />
The control panel is also progressing, this needs to be completed so I can gauge to correct size for the hole to accommodate in the body. Then I can move on to prepping and painting, before fitting all the systems in the body shell.<br />
I decided on a two part mould. Hopefully the two parts will pull apart easily. Again with the experimental, I went for plain MDF with no primer, just 6 or so layers of wax release agent, all holes and imperfections filled with wax.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhNqNv3_5u5ZhTCOeyhfl1HeP1-mxtd0r7KS0rZULKnDfMJCU-Q1eA2bpmBgEB4MQ2VMX727xu2CuiNU54moP7tbPkEbQY9gXkUKWc_S4Db3r34ucseptXqI_oBI4DvrXRcucixzBXPS-0/s1600/DSC02148s.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhNqNv3_5u5ZhTCOeyhfl1HeP1-mxtd0r7KS0rZULKnDfMJCU-Q1eA2bpmBgEB4MQ2VMX727xu2CuiNU54moP7tbPkEbQY9gXkUKWc_S4Db3r34ucseptXqI_oBI4DvrXRcucixzBXPS-0/s400/DSC02148s.JPG" width="400" /></a></div>
Both sides of the control panel mould are now covered.Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-84285463720996587182017-08-16T23:02:00.000+01:002017-08-17T07:24:16.984+01:00K9 Diaries - A Body in the Garage<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhySUA-__AZ2Lilp2wEt-HpO7h4VdAz69C2U8HiLKP9Smn5236hOVSSHNpY_p_HiEIpZqIDqY2lNGhFbQmqIJE_Pj4Bw7Zreonk4fQl0t190DOGzaakrECGonDEA-YmODHMiDmpB7KLGd8/s1600/DSC02120s.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="750" data-original-width="1000" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhySUA-__AZ2Lilp2wEt-HpO7h4VdAz69C2U8HiLKP9Smn5236hOVSSHNpY_p_HiEIpZqIDqY2lNGhFbQmqIJE_Pj4Bw7Zreonk4fQl0t190DOGzaakrECGonDEA-YmODHMiDmpB7KLGd8/s640/DSC02120s.JPG" width="640" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Removing the mould</td></tr>
</tbody></table>
It began like any other evening, visiting family, what I really wanted to do was to get home to deal with the body in the garage. I had quietly secured it the previous evening, and I just needed time for the idea to gel. When I finally got into the garage, it was like driving a wedge between reality and a shadow. How would it turn out, would this be the end of a dream? Would the Fibreglass police turn up at my door and charge me with insufficient application of release agent?<br />
<br />
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjQoYaRtsqGfYCGOkv6UhQdIMqGoN7Goby9rDuVe2SR-yEgj18JJgIrNYK_NFmJfr5trDyzaVAg0JBF3LIoRscFuvyGnR9DROMR5anTIzptCPZmf999ribpGPfhbzudEncFS6IwkTI0Dhk/s1600/DSC02122s.JPG" imageanchor="1" style="clear: left; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjQoYaRtsqGfYCGOkv6UhQdIMqGoN7Goby9rDuVe2SR-yEgj18JJgIrNYK_NFmJfr5trDyzaVAg0JBF3LIoRscFuvyGnR9DROMR5anTIzptCPZmf999ribpGPfhbzudEncFS6IwkTI0Dhk/s400/DSC02122s.JPG" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">One side revealed</td></tr>
</tbody></table>
After the wedges had been gingerly tapped in, the mould began to release again quite easily at the top, but it seemed to be sticking in the recesses again. Oh the torment, until with a cracking sound it just popped off. I was so relieved!<br />
<br />
It also looked quite good for saying I'd taken a chisel to the mould. <br />
<br />
Then it was on to the other side, I wasn't out of the woods yet.<br />
<br />
<br />
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: right; margin-left: 1em; text-align: right;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh7FI9QhW1R6HIOyrtGJAaVybS9N7UMAfm0UQfvY7Bw6qZz8bm7rpczcdl9PQIbpdOVzN96J7Rdg_hw8mKzckNslqWdk4IVsIpx1yR4XkcTQwqVTAyNCFDxkJqRJCEoqXZl8iNam8JNhHw/s1600/DSC02126s.JPG" imageanchor="1" style="clear: right; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh7FI9QhW1R6HIOyrtGJAaVybS9N7UMAfm0UQfvY7Bw6qZz8bm7rpczcdl9PQIbpdOVzN96J7Rdg_hw8mKzckNslqWdk4IVsIpx1yR4XkcTQwqVTAyNCFDxkJqRJCEoqXZl8iNam8JNhHw/s400/DSC02126s.JPG" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Right side and front.</td></tr>
</tbody></table>
<br />
I was on a roll, the wax release agent is definitely is the way to go. Perhaps I'll try Easy Lease again in the future but I'll test it out on some not so important bits before I roll that dice again.<br />
<br />
Here are three sides revealed, it was going too well!<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj3Y9tFZBtlt7kSGuEWi7KRmOh1M51PL4NkIgoek_C5MurKAVTLeTH6C8qWgLFYEBqGX9yMzXrxnHHH4A5V0IhkdtXgtc-pfkz0skEIMkGbb__jhTdlPnGpfm9ywXapQtlOuBqB8HMAW-A/s1600/DSC02128s.JPG" imageanchor="1" style="clear: left; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj3Y9tFZBtlt7kSGuEWi7KRmOh1M51PL4NkIgoek_C5MurKAVTLeTH6C8qWgLFYEBqGX9yMzXrxnHHH4A5V0IhkdtXgtc-pfkz0skEIMkGbb__jhTdlPnGpfm9ywXapQtlOuBqB8HMAW-A/s400/DSC02128s.JPG" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Time for the bum</td></tr>
</tbody></table>
<br />
<br />
The rear section was a little tricky, I thought it was going to give me some problems, but in the end just a little gentle teasing and plastic wedges tapped in all round, was all that was required. <br />
<br />
The top section was a breeze. So this is it, K9 has a body shell, just a bit of a trim to remove the excess fibres around the edges and a little light sanding required around the edges.
<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjlpq5obqMLC7siAESbE_i9PZUFu9z9IitOIw3Gm6WQtMDbALt6gv7Q1aTlgdjOyaPHbkWNYlHi2O5HQQ65naNfcUwwVV58n7VfDaWnW7G-7pHcnTrPw4mfOccDjO13ocmFsPxJKwfej4Q/s1600/DSC02134s.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="877" data-original-width="1000" height="560" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjlpq5obqMLC7siAESbE_i9PZUFu9z9IitOIw3Gm6WQtMDbALt6gv7Q1aTlgdjOyaPHbkWNYlHi2O5HQQ65naNfcUwwVV58n7VfDaWnW7G-7pHcnTrPw4mfOccDjO13ocmFsPxJKwfej4Q/s640/DSC02134s.JPG" width="640" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">K9's body revealed</td></tr>
</tbody></table>
Photos by my lovely wife, Debs :)Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-92226227547493594392017-08-16T12:03:00.000+01:002017-08-16T12:03:43.872+01:00K9 Diaries - 3 Weeks to Whooverville 09 - PANIC MODE<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjIV1Yw26BKxScIa4QJSrVIUO_7Xz7FQ80vH8GsAskbs6RWp6Qut4z6tWjIKaj2WgLbgs1j6WgTbj-qaHxKExZh6BZ3127Qg8e_Qomoq8mlEbmYExOHPuNvcS2ohfpDalruDUvDNhh_bTY/s1600/DSC02101s.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjIV1Yw26BKxScIa4QJSrVIUO_7Xz7FQ80vH8GsAskbs6RWp6Qut4z6tWjIKaj2WgLbgs1j6WgTbj-qaHxKExZh6BZ3127Qg8e_Qomoq8mlEbmYExOHPuNvcS2ohfpDalruDUvDNhh_bTY/s400/DSC02101s.JPG" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Front and rear panels</td></tr>
</tbody></table>
After soaking the MDF and then scraping the primer off with a chisel, I've finally got a mould. There is still work to do cleaning it up, so I believe I need to fill any defects and then give the panels a light sanding.<br />
<br />
This will probably take me through the weekend leaving less than 3 weeks to finish K9. Oh woe is me.<br />
<br />
3 Weeks and counting - The situations is: Still no body, head, side panel or control panel.<br />
<br />
The Motorised base is still good, and batteries have arrived, but charger needs sorting out.<br />
Raspberry Pi is good, I2C connection to Arduino works.<br />
Screen is good and the HiFi Berry should be great.<br />
<br />
If I can press on with the fibreglass this weekend, I may have a body shell and maybe a head.<br />
<br />
The control panel could be fabricated quite quickly, and side panel is a quick job (famous last words).<br />
<br />
So just a bit of filling where required, then onto waxing before fabricating the body shell......<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjFD83bEYYuWpPPs0bcSe2E44OAA_tEcZPQDHIV1MOpgoFOkPbjpIRPyx56cZkdXiApekNeAKHPMH6lNjkl0Ne8g_bxtIL_k0n4DUQlUFioNRos7ooM3RgCNwxTdlv_QCXKvzrkUhwLTPI/s1600/DSC02107s.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjFD83bEYYuWpPPs0bcSe2E44OAA_tEcZPQDHIV1MOpgoFOkPbjpIRPyx56cZkdXiApekNeAKHPMH6lNjkl0Ne8g_bxtIL_k0n4DUQlUFioNRos7ooM3RgCNwxTdlv_QCXKvzrkUhwLTPI/s400/DSC02107s.JPG" width="400" /></a></div>
<br />
<br />
<br />
It's a mould, huzzah. Not as pretty and shiny as it could have been but hopefully serviceable. With six coats of wax mould release agent, I'm pressing on!<br />
<br />
Still no head, and I'm dreading trying to remove the bit's I've attached.Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-50060770704651929062017-08-06T21:34:00.002+01:002017-08-16T12:02:11.919+01:00K9 Diaries - Sticky Situation<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj67P4xzgVuw5ugdQXJSgo7yCArr_rxZ43wPvqn6-3WaUEaWMo26kyP2fdh08Zw7rGsTCFI4bmvRr2pUh36UTNmfrXRYrUc1mJA6iT7dlkeq7TqsXAIA6eIRKt1l2IuTfqRFhcidc1BHhs/s1600/DSC02086s.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj67P4xzgVuw5ugdQXJSgo7yCArr_rxZ43wPvqn6-3WaUEaWMo26kyP2fdh08Zw7rGsTCFI4bmvRr2pUh36UTNmfrXRYrUc1mJA6iT7dlkeq7TqsXAIA6eIRKt1l2IuTfqRFhcidc1BHhs/s400/DSC02086s.JPG" width="400" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
With high hopes, I started gently inserting wedges and tapping them in. The mould should have just popped off.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiiIuMjW0sEhdWu4Ts4POqBXxe95WmVuOB_Fuh_ICRPLfIeyb2pGAulnfhjjIy1Q20qDWqxO1JphTeDmEGgmfGhcNY8RnC9p5NXrud0iqz1BOuGxIi2yz7ovFQVNqsFdEksZ8YaewgpHbM/s1600/DSC02087s.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" data-original-height="944" data-original-width="800" height="400" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiiIuMjW0sEhdWu4Ts4POqBXxe95WmVuOB_Fuh_ICRPLfIeyb2pGAulnfhjjIy1Q20qDWqxO1JphTeDmEGgmfGhcNY8RnC9p5NXrud0iqz1BOuGxIi2yz7ovFQVNqsFdEksZ8YaewgpHbM/s400/DSC02087s.JPG" width="338" /></a></div>
After carefully working my way round tapping in wedges, it became apparent that it wasn't going to be that easy. <br />
<br />
Unfortunately the release agent hasn't done its job. Rather than separating easily, I had to apply excessive force, which ripped the recess out of the pattern. <br />
<br />
Wailey, Wailey! <br />
<br />
I now had a big hole in the pattern and was quite anxious about the rest of the mould.<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhaS0JlHmrhbtxWaSmH7ymGUCgNJ1clHzKBKShYCo_OjFUvwlR0bBy66TGZtUjuAozlXJxtzTpTIppKHDSm2FhYsoOAyVl6oK_9DbGIRSNQyltRlttDGy6NxIctUP-cLvpca360RN1Wz5M/s1600/DSC02088s.JPG" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" data-original-height="773" data-original-width="900" height="342" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhaS0JlHmrhbtxWaSmH7ymGUCgNJ1clHzKBKShYCo_OjFUvwlR0bBy66TGZtUjuAozlXJxtzTpTIppKHDSm2FhYsoOAyVl6oK_9DbGIRSNQyltRlttDGy6NxIctUP-cLvpca360RN1Wz5M/s400/DSC02088s.JPG" width="400" /></a></div>
This is strange because the top half has released reasonably well, but in the worst possible places, the recesses, the mould has stuck to the pattern.<br />
<br />
I messaged easy composites to get their take one the situation and was told that on new moulds they recommended 6 coats Doh!<br />
<br />
So the issue was repeated on all four panels. <br />
<br />
<br />
<br />
<br />
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhH1wUkbrEdcGbixSV9hOx5Ye_vlcroR6IbEbJmox_aVmT1e85KOLZ5cn3v3g5ukwTyvMY8H0CIaQjtmrcB6azN2SxFR_HVD0tsGcOjy5gx4VfsKpAslVP0unoWsrtCDDR9p48jqsLuN0Y/s1600/DSC02091s.JPG" imageanchor="1" style="clear: left; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhH1wUkbrEdcGbixSV9hOx5Ye_vlcroR6IbEbJmox_aVmT1e85KOLZ5cn3v3g5ukwTyvMY8H0CIaQjtmrcB6azN2SxFR_HVD0tsGcOjy5gx4VfsKpAslVP0unoWsrtCDDR9p48jqsLuN0Y/s400/DSC02091s.JPG" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Side panel<br />
The same with the other side, as well as front and rear.</td></tr>
</tbody></table>
<br />
<br />
In the end, I've had to demolish the entire K9 pattern to get the
mould off. <br />
<br />
This could slow things down a bit :(<br />
<br />
And here's the remains of the K9 pattern, 'tis but a scratch. I'm sure that with a bit of glue and a polish we can get it back together and have another go. <br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjCHPwyD4e4aWdhumH4UU3TKHUdBnELOsqdBDLJBCsGFAncK0SRMZUOJn7vn5NbyB8-DYAeECGP1V6w-0tZQfLQLopbGmlyCBOG6W9QCs7lbL6fQX5P6kcOL6kV8SP9b0xJXiewvFtBBsk/s1600/DSC02105s.JPG" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjCHPwyD4e4aWdhumH4UU3TKHUdBnELOsqdBDLJBCsGFAncK0SRMZUOJn7vn5NbyB8-DYAeECGP1V6w-0tZQfLQLopbGmlyCBOG6W9QCs7lbL6fQX5P6kcOL6kV8SP9b0xJXiewvFtBBsk/s400/DSC02105s.JPG" width="400" /></a></div>
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgDfoTO5L-hG3X_hFdR1tFdoo70m4jlDAzNHg-w-xV4CbP_CD6M4ZPWAlBC6lF0X6HgGuOE6VhgVEAe0Rln7vs3rrEca5SMrpzEvqCV1OR-6IvrYMRn886HEjXrnwQwXaBYi22br3cMQJ8/s1600/DSC02097s.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" data-original-height="609" data-original-width="1000" height="242" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgDfoTO5L-hG3X_hFdR1tFdoo70m4jlDAzNHg-w-xV4CbP_CD6M4ZPWAlBC6lF0X6HgGuOE6VhgVEAe0Rln7vs3rrEca5SMrpzEvqCV1OR-6IvrYMRn886HEjXrnwQwXaBYi22br3cMQJ8/s400/DSC02097s.JPG" width="400" /></a><br />
The plan moving forward is to remove the MDF from the mould. Then it's the
primer coat that'll need scraping off. Then clean up the surfaces.<br />
<br />
No doubt a little filling and sanding here and there, but don't get too hung up about scratches in the surface just light sanding and smoothing.<br />
<br />
<br />
<br />
<br />
<br />
After a day of soaking and scraping, the majority of the MDF is removed, but the primer is still attached. <br />
<br />
I've had some success scraping the primer off with a chisel, as long as I
don't scratch the mould surface too much it could be the way forward. Either way it's a lot more work, and time.Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-16474301071144371642017-08-05T10:23:00.001+01:002017-08-05T19:49:20.626+01:00K9 Diaries - Full Glass Jacket<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgXpVU3S_X4vu-mWJv3EYr1GILChJFVS9w8JblssxrziSnH21v_mzhUXQ96oR-Oa1U7UcBRtcCyu5z00FqS2_xHx08M2Q4FiXbyq1S6bVA8RtP-90CMd5hcBVa5VwvJBO55K6wMEYXO1pw/s1600/DSC02082s.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgXpVU3S_X4vu-mWJv3EYr1GILChJFVS9w8JblssxrziSnH21v_mzhUXQ96oR-Oa1U7UcBRtcCyu5z00FqS2_xHx08M2Q4FiXbyq1S6bVA8RtP-90CMd5hcBVa5VwvJBO55K6wMEYXO1pw/s400/DSC02082s.JPG" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Side prepared, ready...</td></tr>
</tbody></table>
The last side, it's been a long journey, but it is nearly over, It seems like I've been making this part forever, I've made a body, only to make a shell round it. So very soon I can move on to making the the actual body shell, that will be K9! <br />
<br />
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEipbQZ2zFF0rEtRYfzNOjt5P8iYQs1_OuoYBZ_pZN1e4NE8vs1mzNmm2N3NiB6c91APBmUWvdoCphP7OiGmTU6_j4ayKxrcO9XMDhE3FUldBeRSnxY5pm8Lj-60OaO-dkBGOzlDqkjTpT0/s1600/DSC02083s.JPG" imageanchor="1" style="clear: left; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEipbQZ2zFF0rEtRYfzNOjt5P8iYQs1_OuoYBZ_pZN1e4NE8vs1mzNmm2N3NiB6c91APBmUWvdoCphP7OiGmTU6_j4ayKxrcO9XMDhE3FUldBeRSnxY5pm8Lj-60OaO-dkBGOzlDqkjTpT0/s400/DSC02083s.JPG" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">The final count down</td></tr>
</tbody></table>
I've received some more matting, this lot is a heavier weight so will make thicker layers, but will also require more resin.<br />
<br />
Today, I've given the right hand side of the pattern a
coating of fibreglass, so that's all the sides done. I'm concerned that I
may not have made the layers thick enough, but we will see how it goes. The thicker matting seemed to be easier to work with than the lighter weight matting I was using, so in future I'll use the 450g/square metre
<br />
<br />
<br />
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: right; margin-left: 1em; text-align: right;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgufrgN0TnqNoXWmgowUyNjCD1uw0XG7AKDhf5Vjqzf3doSe_u9cCyGxH7r1HwbDFwMcXq45tN8YEjniAsCTzMzem8NZxHISf4SIX0VCeHAlLZqUdrQWaz9TLBr-5j1cZ8EkqDjKKlTcl4/s1600/DSC02084s.JPG" imageanchor="1" style="clear: right; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" data-original-height="750" data-original-width="1000" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgufrgN0TnqNoXWmgowUyNjCD1uw0XG7AKDhf5Vjqzf3doSe_u9cCyGxH7r1HwbDFwMcXq45tN8YEjniAsCTzMzem8NZxHISf4SIX0VCeHAlLZqUdrQWaz9TLBr-5j1cZ8EkqDjKKlTcl4/s400/DSC02084s.JPG" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Ready to break apart</td></tr>
</tbody></table>
After a bit of tidying, removing the hairy perimeter, we have a clean edge to see the interface between the mould pieces. I've drilled holes to hold the pieces together when it's being used as a mould.
<br />
<br />
Tomorrow is the big reveal, the unwrapping day, when I'll find out what sort of a job I've made of it.
<br />
<br />
Still if it's a dogs dinner I've still got time to have another go......maybe...So tomorrow will probably be more prepping for the big day.Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-66653953140129433312017-08-03T12:01:00.001+01:002017-08-03T12:03:33.436+01:00Digit Evo1 - One Giant Leap for Digit Evo 1<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: right; margin-left: 1em; text-align: right;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiK9jtfWCzrZP9BcnW-hI9JbMnBkgpHPWrURzef3wHLAkyZ8uQSoYauOLsCD8S0nnHdtie6lsujYtny95fYQmjsdeVwM6YZify_nLLiOb0csXGQFZeJrAal_O-_5OeSoOvkaOsrPmlOvbY/s1600/UKRG.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="1119" data-original-width="1000" height="400" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiK9jtfWCzrZP9BcnW-hI9JbMnBkgpHPWrURzef3wHLAkyZ8uQSoYauOLsCD8S0nnHdtie6lsujYtny95fYQmjsdeVwM6YZify_nLLiOb0csXGQFZeJrAal_O-_5OeSoOvkaOsrPmlOvbY/s400/UKRG.jpg" width="355" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Digit at the Games</td></tr>
</tbody></table>
When we reverted back to Evo 1 Digit, I was pleasantly surprised to find that with just a little more work Digit was good enough to enter in to the event.<br />
<br />
After sorting out the tables in the software that
told the servos what position they had to be and when, I came to the
conclusion that the chassis needed to be stiffened. <br />
<br />
This idea coming about just a few days before the event, became a problem since it
changed the centre of gravity again of Digit, which meant re-writing all the
servo position tables. <br />
<br />
However after after extensive fiddling and re-iteration of the
code, the job was done. <br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgeaiTbuuKSR7TS9f-tuvAQISqPVdIF-wWRS4qZUgLxcOA3HQlbvyEyzvM7DS2uOBgP9cCMUv0ccO__1k37xNGavoZpv6Gz7ao36oxqpMzBh1iMrkoeqg48LjFRAdvIobVle2jykB_NO2w/s1600/P1010099.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="1058" data-original-width="834" height="320" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgeaiTbuuKSR7TS9f-tuvAQISqPVdIF-wWRS4qZUgLxcOA3HQlbvyEyzvM7DS2uOBgP9cCMUv0ccO__1k37xNGavoZpv6Gz7ao36oxqpMzBh1iMrkoeqg48LjFRAdvIobVle2jykB_NO2w/s320/P1010099.jpg" width="252" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Trip</td></tr>
</tbody></table>
<br />
<br />
<br />
Digit Evo 1 managed 3 metres in 27 seconds, on our kitchen floor,
that time and distance equated to 2 minutes 42 seconds over the 18 metres,
which we were reasonably happy with, so we packed everything up ready
for the event. <br />
<br />
So on the 8th July 2006 we went along to the event in Corby, Northampton
where Digit Evo 1 weighed in at 700 grams, and passed the tech check
with flying colours. <br />
<br />
Leaving me free to check out the competitors, and
watch the other competitions whilst we waited for our turn to take part.<br />
<br />
<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: right; margin-left: 1em; text-align: right;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiBl7w-5_vrxw-GNt92kzj7kVV-e73PNU29-IQg1uT-F0yVZq-g542QVTNtspi_Rbtdke4nyrZfdsJjYBaHTh9q9TSBRagLoK4tFoapwWnKn70H1HbscU641g6yvSLTZsBfi3q_gsmVZoA/s1600/P1010064b.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="1221" data-original-width="1257" height="310" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiBl7w-5_vrxw-GNt92kzj7kVV-e73PNU29-IQg1uT-F0yVZq-g542QVTNtspi_Rbtdke4nyrZfdsJjYBaHTh9q9TSBRagLoK4tFoapwWnKn70H1HbscU641g6yvSLTZsBfi3q_gsmVZoA/s320/P1010064b.JPG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Small Steps</td></tr>
</tbody></table>
<br />
Two of the competing robots 'Trip' and 'Small Steps', have overlapping feet which allows for a simple stepping movement to occur with no leaning required. However, these are quite small robots, with quite small steps, so they would need to have very fast steps to achieve a good time over 18 metres<br />
<br />
Robbie and Gorgon are very sophisticated robots capable of achieving
remarkable poses and stunts, Their precision and sophistication meant
that they were not optimised for racing, but they entertained, with
their head stands and rolls.<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><img border="0" data-original-height="1257" data-original-width="1600" height="251" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj0MjGfjttTjEMfHFBfET2VfWYxBzPcudNoH-CdA3Ju7PYs-JXrZUOiL7Q7o-AyEq08pmjzjDgVpwQy7e0qideVB_uLg9cG4JXDMLwTOEWecz3Wu-32syBUzOAs53zAzhNbjU-3q3gylRE/s320/P1010081.jpg" style="margin-left: auto; margin-right: auto;" width="320" /></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Robbie and Gorgon</td><td class="tr-caption" style="text-align: center;"><br /></td></tr>
</tbody></table>
<br />
<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><img border="0" data-original-height="1587" data-original-width="965" height="320" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgRAmD2OQmePNLmLEx3-EORxnrh0oQhtCogU2msekcprz5j1h-oXWD95j8UxoGemFXFfEOoMdNfyBETxDHDOwFPd95-j0XnjWMrLaAveHRyYsI9wAqbI5ey5Gyd4Q01MV4a78lV6yDi-wM/s320/biped1.jpg" style="margin-left: auto; margin-right: auto;" width="194" /></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Barry</td></tr>
</tbody></table>
The robot 'Barry' was another robot with overlapping feet, but again, it had quite a restricted stride length, which explains why it took as long as it did to traverse the 18 metre track.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiSiaZTDNUMyYd_v8FvcgbS668vrYsawBK_z5LHcd0kPayZy4cVLIgZiWeOjt_51MXkg32V-6meVbXF_dVB0f6nEpMUG4lEBjvCQnbuZK5pv4w8OvYmo8fz0H-Zy8mAIl9ZCbb0gY5izsc/s1600/P1010090.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="923" data-original-width="1600" height="184" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiSiaZTDNUMyYd_v8FvcgbS668vrYsawBK_z5LHcd0kPayZy4cVLIgZiWeOjt_51MXkg32V-6meVbXF_dVB0f6nEpMUG4lEBjvCQnbuZK5pv4w8OvYmo8fz0H-Zy8mAIl9ZCbb0gY5izsc/s320/P1010090.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Road Runner 2</td></tr>
</tbody></table>
Digit's only serious competition was 'Roadrunner 2' which was an intriguing robot, with high speed feet. However during the race it struggled with direction and had to stop and realign which slowed it down considerably.<br />
<br />
When Digits turn came, Digit got off to a flying start, but he started veering off course, I tried to steer him as best I could, this involved dragging one foot along the ground a little and is more of a directional bias than steering.<br />
<br />
Digit rode up on the lane dividing strip, which actually helped me steer him straighter and recovered and so he put in a blistering time of 1 minute 46 seconds, despite having some steering problems.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEglOnZ3wwTxoEMpcI82Ccno6_HeNmmxOr5fvxtDp_DHp3Lfkf8UzYSSZ90nUDdaH-cYStVuZZbXrbNIv6wueIyZavJT3kZQR9opvrHCNNImqhVTgObJZxAumE72KHSHG5uynRAz-o8NV2Q/s1600/Finishing_Times.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="390" data-original-width="879" height="176" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEglOnZ3wwTxoEMpcI82Ccno6_HeNmmxOr5fvxtDp_DHp3Lfkf8UzYSSZ90nUDdaH-cYStVuZZbXrbNIv6wueIyZavJT3kZQR9opvrHCNNImqhVTgObJZxAumE72KHSHG5uynRAz-o8NV2Q/s400/Finishing_Times.jpg" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Biped Race Results</td></tr>
</tbody></table>
<br />
We were thrilled to win the UK Robotic Games Biped Walker event with Digit Evo 1.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhoKTlZbBzjtcvBk_v-eGIyGoEbNJrb9qWp_9wwDRdoRKbJaWYGF3fged71vRYK1ewucpKvvbVSzPLRuQ052UrMqeFbWEL_G9SAXtY1Bcdl1BrpJUBZPmTJYPvdmV9q2QD3Xeuqrh87G04/s1600/award.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="1219" data-original-width="1061" height="320" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhoKTlZbBzjtcvBk_v-eGIyGoEbNJrb9qWp_9wwDRdoRKbJaWYGF3fged71vRYK1ewucpKvvbVSzPLRuQ052UrMqeFbWEL_G9SAXtY1Bcdl1BrpJUBZPmTJYPvdmV9q2QD3Xeuqrh87G04/s320/award.jpg" width="278" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Receiving Digits 1st Place Certificate</td></tr>
</tbody></table>
Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-55717486053986568412017-08-03T11:37:00.000+01:002017-08-03T11:37:08.623+01:00Digit Evo 2 - A Step too Far<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiq50T-u4PXMhI26F5grBDFCcVFl2NNXRJ2UeAgMyILQ-RzOA1Zd8ULE72ryQh025iw9Bne0DnOaIeVSiCC1aJTIbY6JDTsOyVR8rIT9XgvpO6VDyc4zmzifAU-hOissH_Ld0uEBwn-HNs/s1600/digit-evo2.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="1000" data-original-width="643" height="400" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiq50T-u4PXMhI26F5grBDFCcVFl2NNXRJ2UeAgMyILQ-RzOA1Zd8ULE72ryQh025iw9Bne0DnOaIeVSiCC1aJTIbY6JDTsOyVR8rIT9XgvpO6VDyc4zmzifAU-hOissH_Ld0uEBwn-HNs/s400/digit-evo2.jpg" width="256" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Digit Evo 2</td></tr>
</tbody></table>
Digit Evo 1, just wasn't fast enough or sophisticated enough for my liking, so I stored him away and began work on Digit Evo 2.<br />
<br />
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: right; margin-left: 1em; text-align: right;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgwe5vTma1_JKP9vEnrtgUdE4yeLNdgXyu_4nBi9AKiFcFX9_9l4Wir55zAgpEI5qnuvlfFGu8ycBHG_EO-ZRgx6glwbeOAD1p7oGh8o9OtlGu5HJ-36ZywPm9gzCC-J7JJOToNOWQ3FLk/s1600/digit-evo2-knee.jpg" imageanchor="1" style="clear: right; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" data-original-height="750" data-original-width="1000" height="240" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgwe5vTma1_JKP9vEnrtgUdE4yeLNdgXyu_4nBi9AKiFcFX9_9l4Wir55zAgpEI5qnuvlfFGu8ycBHG_EO-ZRgx6glwbeOAD1p7oGh8o9OtlGu5HJ-36ZywPm9gzCC-J7JJOToNOWQ3FLk/s320/digit-evo2-knee.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Evo 2 Knee</td></tr>
</tbody></table>
With Evo 2 I intended to give it proper legs with jointed 'knees', which would allow him
to raise his feet off the ground, rather than leaning over to raise a foot clear.<br />
<br />
However, the control of the servos relied on sequences of positions stored in tables in the micro-controller. The values were selected in real time for the servos, with no feedback. Feedback being necessary so that the robot knows how it is positioned within its environment and how it is walking. Many of us may recall walking up the stairs in the dark, and taking an extra step at the top of the stairs, where in actuality there is no extra step, and subsequently stumbling. <br />
<br />
Our eyes normally tell us where the steps are, if being able to see the step is removed, we rely on memory and other senses. We also get feedback from the feel of our feet on the steps, Evo 2 has only the memory of where to place his feet. So if things start going wrong he doesn't realise and just carries on trying to walk, and has no ability to correct or accommodate things not being quite as he expects. All with a lot more servos, so considerably more complicated to get
walking.<br />
<br />
I did consider gyros and sensors etc, but at that time I didn't have the technology to proceed with that, and I was programming the micro controller in machine code, so it would have been a major leap in programming to accommodate the added complexity. <br />
<br />
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEicd4fPFBURQ6VrQVpwe_GgzVT7LJrbZOaOP9eFePOWC1PfHo7WvV9vW2x7droJ22y2sPose8kcdua1E3leQjXi2hKAZ-B_yI-sRdEcZ42f62X-bPkU6vkmv4p9_3jlYLLhYXTPCBwMjPU/s1600/digit-evo2-foot.jpg" imageanchor="1" style="clear: left; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" data-original-height="750" data-original-width="1000" height="240" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEicd4fPFBURQ6VrQVpwe_GgzVT7LJrbZOaOP9eFePOWC1PfHo7WvV9vW2x7droJ22y2sPose8kcdua1E3leQjXi2hKAZ-B_yI-sRdEcZ42f62X-bPkU6vkmv4p9_3jlYLLhYXTPCBwMjPU/s320/digit-evo2-foot.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Evo 2 Foot</td></tr>
</tbody></table>
I soldiered on trying to sequence the movements. Controlling the hip there is one servo for both legs striding, and one
servo to twist one of the legs, for direction, then in each leg there is the the knee
servo and 2 ankle servos mounted on the foot.<br />
<br />
Looking at the construction now, it does look a bit spindly, and the joints, although machined do not look like they would be stiff enough to precisely maintain the axial position, and would be a source of twisting etc.<br />
<br />
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: right; margin-left: 1em; text-align: right;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj7kbOghEwWmpsU5Z1oFPSbcmzQCuG5a47J7wOwyoDdzMekFTKwCqIncGn4zpeQtwNyy1y6MvAJS5n4jKKmTyi35DyuvHSU_StUGyOqImYmTs6hvLbN9uAxDb_fbYCWNnEmIkr_xbETpmU/s1600/digit-evo2-hips.jpg" imageanchor="1" style="clear: right; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" data-original-height="1000" data-original-width="750" height="320" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj7kbOghEwWmpsU5Z1oFPSbcmzQCuG5a47J7wOwyoDdzMekFTKwCqIncGn4zpeQtwNyy1y6MvAJS5n4jKKmTyi35DyuvHSU_StUGyOqImYmTs6hvLbN9uAxDb_fbYCWNnEmIkr_xbETpmU/s320/digit-evo2-hips.jpg" width="240" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Evo 2 Hips</td><td class="tr-caption" style="text-align: center;"><br /></td></tr>
</tbody></table>
<br />
<br />The connecting rods are carbon fibre tubes 6mm in diameter and quite stiff. Another observation is that there is no shock absorption, so those poor
servos had to put up with a lot of stress, and the servos range of motions look like they could have had a better arrangement.<br />
<br />
Digit Evo 2 took a considerable length of time to build and wasn't as rigid as it could be. Instructing all the servos at the same time in a sequence, wasn't
going to accurately position the legs and feet, as there is too much movement
in the joints and twist in assemblies. So in the end all Evo 2 managed, was a quick stumbling fall every time.<br />
<br />
I had a lot of fun working on him, but in the end we decided Evo 2 wasn't going to be finished in time for the 2006 UK Robotic Games, so we reverted back to Evo 1.<br />
<br />
As a first attempt it wasn't too bad, but definitely needed development. However there wasn't another UK Robotic Games so poor Evo 2 has been stuck on the shelf along with all my other distractions. Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-92089020382030508392017-08-03T10:03:00.001+01:002017-08-03T12:03:44.556+01:00Digit Evo 1 - One Small Step for Robot Kind<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhzryv9EFOtfrZPAA6IPxb4zu2ECbcRK2drTDyJhGglT26tKWI9PtF6w2e2HDym_jAmT80_FMp_LQkXNOp_oWOvO82m-NzcHORm1PfQ1lyW9WHOgeeFt7a6FJ-liIVUuuIfJ0lvL-UleWQ/s1600/s-digit-race.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="555" data-original-width="1250" height="283" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhzryv9EFOtfrZPAA6IPxb4zu2ECbcRK2drTDyJhGglT26tKWI9PtF6w2e2HDym_jAmT80_FMp_LQkXNOp_oWOvO82m-NzcHORm1PfQ1lyW9WHOgeeFt7a6FJ-liIVUuuIfJ0lvL-UleWQ/s640/s-digit-race.JPG" width="640" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Digit Racing Against the Clock</td></tr>
</tbody></table>
In 2006, an event occurred called the UK Robotic Games, which had a biped walking robot category.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhyRJF6EJNriomjKIKRbkYmky8Rv9liU7TYNnIzhvGy0R0nNG-dt0JTaugLCabxeFIEK2Rlq6xJ4GiL13osJiSlaTh4eA9Kb4cgvl_TjWntidv6JjqHmNRZvyUbRLtF3Gh4i_3q2XMLPaM/s1600/s-P7010004.JPG" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" data-original-height="1000" data-original-width="661" height="400" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhyRJF6EJNriomjKIKRbkYmky8Rv9liU7TYNnIzhvGy0R0nNG-dt0JTaugLCabxeFIEK2Rlq6xJ4GiL13osJiSlaTh4eA9Kb4cgvl_TjWntidv6JjqHmNRZvyUbRLtF3Gh4i_3q2XMLPaM/s400/s-P7010004.JPG" width="263" /></a></div>
After about 2 nanoseconds of thought I, decided that I must enter as it was just too tempting to make a walking robot.<br />
<br />
So after much sketching and head scratching I came up with a design and Debs christened it Digit, a name that stuck.<br />
<br />
Digit was quite utilitarian, in that there was no attempt to make it animal like or human like, it was just built to race.<br />
<br />
It is a statically stable biped, which relies on keeping its centre of gravity over it's feet at all times.<br />
To do this it leans one way to raise one foot off the ground then moves that foot forward. It then proceeds to lean the other way, then raises its other foot off the ground and moves that forward etc.<br />
<br />
Movement of the stride and the leaning are done by 2 servos. The control of the servos is by pulse width signals coming from a Microchip micro-controller.<br />
<br />
To make the servo change position at the required rate, a sequence of positions are read from a table and translated into pulses at the correct time.<br />
<br />
The correct table is selected depending upon a second micro-controller, which decodes the signals from a radio control receiver, such as forwards and the speed, as well as direction.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjXeGWXlsa5H1usw4dF44w3w_Hn7hxOUG0wp2pOiz-3JGjwtD2uyNps3mnSLdrlYtquP49vMXBvl1yr96D_oa0D0uApNegh5jMYM6DlSH8gDb8M-WOehseT7gIa-c70_3zNJ7-J-SPQBNQ/s1600/winner-s.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" data-original-height="1000" data-original-width="589" height="320" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjXeGWXlsa5H1usw4dF44w3w_Hn7hxOUG0wp2pOiz-3JGjwtD2uyNps3mnSLdrlYtquP49vMXBvl1yr96D_oa0D0uApNegh5jMYM6DlSH8gDb8M-WOehseT7gIa-c70_3zNJ7-J-SPQBNQ/s320/winner-s.jpg" width="188" /></a></div>
I programmed 3 speeds for digit, which had to be carefully tested, as
stability becomes an issue when leaning side to side, because if you're not
careful, it can throw the robot over because of the momentum.<br />
<br />
Mechanically the robot has 2 large feet, legs are in 2 parts for rigidity, and to keep the foot parallel to the ground. <br />
<br />
At the body the leg parts pivot front and rear with 1 degree of freedom, as there doesn't want to be any sideways motion at the body leg joint.<br />
<br />
At the feet there are 2 degrees of freedom, in the form of hinge type joints, the sideways twist and a swivel. After getting Evo 1 to a walking state, I was inspired to evolve the design, and so set to work on Evo 2.<br />
<br />Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-41352028216903858002017-08-01T23:19:00.003+01:002017-08-05T10:22:10.357+01:00K9 Diaries - Glass Half Full<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhFNlhVSlPGzceEhaehiYpkI6SzQEQUxcnA_riX5SB7DRJDNfnV_Am5jcofuFGRGO8iorbKQ4_bfvAQX6bmCMXGyHu9d3banBc8Sh8RWbhrDjRefUf6BqHKf8oXUTpcD6aHd1Ly48O5Xf0/s1600/DSC02081s.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="685" data-original-width="751" height="363" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhFNlhVSlPGzceEhaehiYpkI6SzQEQUxcnA_riX5SB7DRJDNfnV_Am5jcofuFGRGO8iorbKQ4_bfvAQX6bmCMXGyHu9d3banBc8Sh8RWbhrDjRefUf6BqHKf8oXUTpcD6aHd1Ly48O5Xf0/s400/DSC02081s.jpg" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Left Side Done</td></tr>
</tbody></table>
My fibreglass isn't getting any better. I just hope it's good enough to do the job.<br />
<br />
I applied the gel coat, then realised I hadn't cut any bits of fibreglass matting to shape ready, so I had to wing it a bit and it was a bit hairy.<br />
<br />
Just the far side to go. <br />
<br />
Only a few more days before I'll be able to progress onto actual body shell making rather than, a pattern for the body or a making a mould from the pattern. It'll be the actual body.<br />
<br />
More resin has been ordered together with some slightly heavier weight of matting, from <a href="https://www.ecfibreglasssupplies.co.uk/" target="_blank">East Coast Fibreglass Supplies</a>, so I should now have plenty to complete the task.<br />
<br />
I'm sure the mould should have had more layers to make it more robust, but as it's not intended for a production run of hundreds, it should be OK I hope, fingers crossed.<br />
<br />
I've also not progressed the head any, so only half a job today, but it is a week night so just glad I could get some done. <br />
<br />
I'll push on tomorrow, but prep time seems to be a lot longer than you would think.Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-52567692810121956222017-07-30T23:56:00.000+01:002017-08-05T10:21:32.406+01:00K9 Diaries - Saturday Morning and All is Well<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: right; margin-left: 1em; text-align: right;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi1Vgb-145dh8ZG8HU1Erks01Ke5Y5PKeW5NLRlx5EvilQukYHK_lr-3iHdY0f_09JUhgFokbVcYCqHlJiLDYjsFUQp-9pyKtnhYqYhpZdcPUQ5jThjT1BkWeEdtkvviq7Hk8XhYApQJIM/s1600/DSC02072s.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" data-original-height="1333" data-original-width="1001" height="400" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi1Vgb-145dh8ZG8HU1Erks01Ke5Y5PKeW5NLRlx5EvilQukYHK_lr-3iHdY0f_09JUhgFokbVcYCqHlJiLDYjsFUQp-9pyKtnhYqYhpZdcPUQ5jThjT1BkWeEdtkvviq7Hk8XhYApQJIM/s400/DSC02072s.jpg" width="300" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">K9's head ready for more glass</td></tr>
</tbody></table>
K9's head was a bit of a mess, as I'd managed to get runs of resin on the sides and top as well as bits of fibreglass strands stuck on here and there. Fortunately they cleaned off fairly well, but it's something to look out for in the future. I'll have to look over the areas I'm not working on after, and clean off any spillage before it sets.<br />
<br />
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhWi5ok1-3iN55g01p08-DInTXzde8PS-rdoOKgOdjvdTT67bLFTzq6Nf1Pl83h4gdoSOTRUDDreuIs8GUI0sJexQqi8Z_UGAK2A0iV3UCwJFRKHDVWw78WHNpYQkAnqPgO_8R5GLficKQ/s1600/DSC02071s.jpg" imageanchor="1" style="clear: left; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" data-original-height="1000" data-original-width="750" height="400" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhWi5ok1-3iN55g01p08-DInTXzde8PS-rdoOKgOdjvdTT67bLFTzq6Nf1Pl83h4gdoSOTRUDDreuIs8GUI0sJexQqi8Z_UGAK2A0iV3UCwJFRKHDVWw78WHNpYQkAnqPgO_8R5GLficKQ/s400/DSC02071s.jpg" width="300" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Front, with dams.</td></tr>
</tbody></table>
Today I was supposed to crack on with K9's fibreglass, but life conspired against much progress.<br />
I did manage to start preparing the front end of the body shell, which takes longer than you might think, but then had to stop, as the fibre glassing can take 2 or 3 hours, when you take setting time of gel coat and clean-up time etc.<br />
<br />
So Sunday morning I managed to get back into the garage and get some glass on.<br />
First you cut out the fibre glass into the sizes you think will best suit what you're going to cover. Then you mix the gel coat apply that and wait 45 minutes. I went for a walk in this time. I've taken to doing a 5 km walk at a brisk pace to try and get into shape, so this was an ideal time. On my return, it was straight on to mixing a batch of resin, applying a coat and starting with the first layer of fibreglass.<br />
<br />
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: right; margin-left: 1em; text-align: right;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj670Zw_ya0W2p0o-b_2EpkjuKwq7tNKzfGnpDYi1hFJmA2LHrWu29gvcELHL9VKZrJT440qyce2qhtkitb3gdSgkGDCYjuZfKXYYi0EFclEZJS3lIJwX7YQgBHgQ5iY2aQ9AElJW6aKkA/s1600/DSC02074s.jpg" imageanchor="1" style="clear: right; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" data-original-height="1333" data-original-width="1001" height="400" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj670Zw_ya0W2p0o-b_2EpkjuKwq7tNKzfGnpDYi1hFJmA2LHrWu29gvcELHL9VKZrJT440qyce2qhtkitb3gdSgkGDCYjuZfKXYYi0EFclEZJS3lIJwX7YQgBHgQ5iY2aQ9AElJW6aKkA/s400/DSC02074s.jpg" width="300" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Front completed.</td></tr>
</tbody></table>
Getting into corners is always interesting. On some of the hardest ones
on the head I've used chopped strands of fibreglass then applied resin. It can be a bit messy as the strands like to stick to your paint brush.
It does seem to be a good way to get into corners though.There was the
usual misalignment's and patching.<br />
<br />
It's getting quite exciting now, just the sides remaining, which might take less time as there are boundaries to set-up as they are already there. Just a strip along the bottom.<br />
<br />
<br />
I've not decided how to handle the panel cut-out yet. Perhaps I should set up a boundary of some kind where it'll be cut-out? It seems a waste to cover an area that isn't required.<br />
<br />
The same with the monitor aperture, it will take a little extra setting up time, but will save materials. Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0tag:blogger.com,1999:blog-5068548158525495151.post-875276046338673602017-07-28T23:14:00.001+01:002017-08-05T10:21:46.930+01:00K9 Diaries - Does My Bum Look Big In This?<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi2XHD-Wq6HRpCgQtDSe_5xBOZ0jcIqO2EMO9wPphP9JkRoFo9Tn5R7PFsuIW7N9TvZLmf4qO3Ir9JvFQjj9aiUSgdtXAcfr4a-3X1FdNQmknOxSBmvrJDw-3LzYEzj0VfezEzDVGRQywE/s1600/DSC02069s.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" data-original-height="1000" data-original-width="750" height="400" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi2XHD-Wq6HRpCgQtDSe_5xBOZ0jcIqO2EMO9wPphP9JkRoFo9Tn5R7PFsuIW7N9TvZLmf4qO3Ir9JvFQjj9aiUSgdtXAcfr4a-3X1FdNQmknOxSBmvrJDw-3LzYEzj0VfezEzDVGRQywE/s400/DSC02069s.jpg" width="300" /></a></div>
After work today, I was eager to get into the garage to see it I can peel the boundary pieces off.<br />
and here is K9's bum, coated in fibreglass :), as you can see the boundary pieces pealed off easily with no problems, so that was quite a relief. <br />
<br />
Also K9's head pattern, with one section of the mould attached.<br />
<br />
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj15sgyTZjilzVlR0Xfg0fXRc9dO3nvEg-nzlrV7W795eqeZ1O8KqYlsHNZ11445Kikf24HPa5fnvVJxDHJs1KACYQQIbX4jAwfbRC4QeBM_wZuOP4lO9vLK1pSc3gUyjIqh55F9470JzY/s1600/DSC02070s.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="750" data-original-width="1000" height="240" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj15sgyTZjilzVlR0Xfg0fXRc9dO3nvEg-nzlrV7W795eqeZ1O8KqYlsHNZ11445Kikf24HPa5fnvVJxDHJs1KACYQQIbX4jAwfbRC4QeBM_wZuOP4lO9vLK1pSc3gUyjIqh55F9470JzY/s320/DSC02070s.jpg" width="320" /></a><br />
<br />
Work stopped for the rest of the evening because we went to see Wyrd Sisters, a play adapted from Terry
Prachett's book, so back to it tomorrow.<br />
<br />
I can see these moulds being finished in a few days, but there is still the side panel and control panel to consider. Only five weeks and 1 day remaining until Whooverville 9. If I keep at it I might just make it. As long as there are no disasters along the way.<br />
<br />
Debs is telling me that I should splash out on the proper lights/switches on the control panel. I was going to try 3D printing some bezels and using the lenses I'd sourced, I will have to mull it over, but quickly.
Anonymoushttp://www.blogger.com/profile/16727035552932263051noreply@blogger.com0